Hydraulic Universal Testing Machines (UTM )

 

 

Hydraulic Universal Testing Machines (UTM )

 
 
 
Universal Hydraulic Tensile Test Machine is designed to test the ferrous materials for structural values such as yield strength and tensile strength. Apart from tensile tests, Universal Test Machines can also be used for compression tests  up to the capacity of the machine.

Maximum security is maintained on 600kN capacity Universal Test Machine by limit switch on the lower grip and piston as well as the safety check valves on the hydraulic system. Hydraulic power unit works silently.




Hydraulic Loading Unit of Universal testing machines UTM consists of:

  • Hydraulic power pack to develop adequate hydraulic pressure to be applied to the specimen under test
  • Flow control valves to smoothly control the rate of loading
  • Machine table which moves up and down with hydraulic ram
  • Chain and sprocket mechanism with geared motor to control movement of middle crosshead
  • Upper crosshead connected to machine table through plane columns
  • Main screws for adjusting and controlling position of middle crosshead
 

Specifications

UTM 400kN UTM 600kN UTM 1000kN UTM 2000kN
Loadcell Capacity 400000 N 600000 N 1000000 N 2000000 N
Weight 1000 kg 1200 kg 3000 kg 10000 kg
Max stroke length 200 mm 250 mm 250 mm 250 mm
Daylight between columns 500 mm 600 mm 700 mm 700 mm
Vertical daylight 750 mm 800 mm 850 mm 900 mm
Resolution 4.00 N 6.00 N 10.00 N 20.00 N
Supply Voltage 230V 50 Hz, max. 2.1 kW 230V 50 Hz, max. 2.1 kW 3*400 V 50 Hz, max. 4,5 kW. 3*400 V 50/60 Hz, max. 8 kW
Speed Range 0.1mm/min – 150mm/min 0.1mm/min – 50mm/min 0.1mm/min – 80mm/min 0.1mm/min – 60mm/min
Height 4700 mm
Force measuring error Error on force is less than 1% in the range from 0.45kN to 400kN Error on force is less than 1% in the range from 1kN to 600kN Error on force is less than 1% in the range from 1kN to 1000kN Error on force is less than 1% in the range from 2kN to 2000kN

 


Call Now
× How can I help you?